cloudflare/moltworker：README 來源編輯指南

cloudflare/moltworker 的 README 將專案描述為「Run OpenClaw, (formerly Moltbot, formerly Clawdbot) on Cloudflare Workers」。本文只整理倉庫可直接核對的內容，不把 star、Fork 或宣傳語當成品質證明。README 在「OpenClaw on Cloudflare Workers」下寫到：> Experimental: This is a proof of concept demonstrating that OpenClaw can run in Cloudflare Sandbox. It is not officially supported and may break without notice. Use at your own risk.。這說明的是專案邊界，不是已完成的生產驗證。

從 README 的「Container Cost Estimate」與相關條目，可以先判斷它是否處理你的實際問題：CPU is billed on active usage only, not provisioned capacity. The 10% utilization estimate is a rough baseline for a lightly-used personal assistant; your actual cost will vary with usage.。若需求不同，不應只因專案熱度就採用。本文保留原始專案名、命令與元件名，方便回到一手來源核對。 README 另外列出一項可核對的資訊：AI Gateway (optional, for API routing/analytics)。這類原文條目可用來設計試跑步驟，但不能取代實際環境測試。

README 將運作方式分散在「Container Cost Estimate」等段落。可確認的線索包括：This project uses a standard-1 Cloudflare Container instance (1/2 vCPU, 4 GiB memory, 8 GB disk). Below are approximate monthly costs assuming the container runs 24/7, based on Cloudflare Containers pricing:。本文不把未寫出的架構、效能或安全邊界補成結論；真正的執行鏈仍要配合目錄、設定檔與版本標籤檢查。

第一次安裝應從 README 指出的入口開始。目前可核對的命令是： # Install dependencies npm install # Set your API key (direct Anthropic access) npx wrangler secret put ANTHROPIC_API_KEY # Or use Cloudflare AI Gateway instead (see "Optional: Cloudflare AI Gateway" below) # npx wrangler secret put CLOUDFLARE_AI_GATEWAY_API_KEY # npx wrangler secret put CF_AI_GATEWAY_ACCOUNT_ID # npx wrangler secret put CF_AI_GATEWAY_GATEWAY_ID # Generate and set a gateway token (required for remote access) # Save this token - you'll need it to access the Control UI export M 如果倉庫沒有命令，本文不會自行編造步驟，而是建議先閱讀「Requirements」，確認系統依賴、預設埠與首次初始化。

日常使用取決於專案文件。README 的「Container Cost Estimate」段落提到：| Resource | Provisioned | Monthly Usage | Included Free | Overage | Approx. Cost | |----------|-------------|---------------|---------------|---------|--------------| | Memory | 4 GiB | 2,920 GiB-hrs | 25 GiB-hrs | 2,895 GiB-hrs | $26/mo。設定檔、環境變數、權限與資料目錄只在來源明確時才會記錄；沒有寫出的預設值，應在測試環境驗證並保留回滾副本。 同一部分也提到：Memory and disk are billed on provisioned capacity for the full time the container is running.。